Motorola Canopy Backhaul Module Guía de usuario descargar pdf (Pagina 254)

100

101

March 2005 Building Your Canopy Network

Through Software Release 6.1

Page 254 of 425 Issue 1

Canopy System User Guide

18.5.2 IP Configuration Page of the BHS

An example of the BHS IP Configuration page is displayed in Figure 95.

Figure 95: IP Configuration screen, BHS

You may set the following IP Configuration page parameters.

LAN1 Network Interface Configuration, IP Address

Enter the non-routable IP address to associate with the Ethernet connection on this BHS.

(The default IP address from the factory is 169.254.1.1.) If you set and then forget this

parameter, then you must both

1. physically access the module.

2. use an override plug to electronically access the module configuration

parameters at 169.254.1.1. See Overriding Forgotten IP Addresses or

Passwords on AP, SM, or BH on Page 302.

RECOMMENDATION:

Note or print the IP settings from this page. Ensure that you can readily

associate these IP settings both with the module and with the other data

that you store about the module.

LAN1 Network Interface Configuration, Subnet Mask

Enter an appropriate subnet mask for the BHS to communicate on the network. The

default subnet mask is 255.255.255.0. See Allocating Subnets on Page 123.

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 424 425

Comentarios a estos manuales

Sin comentarios

Motorola Canopy Backhaul Module Guía de usuario Pagina 254

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Motorola Canopy Backhaul Module