Motorola Canopy Backhaul Module Guía de usuario descargar pdf (Pagina 221)

100

101

Building Your Canopy Network March 2005

Through Software Release 6.1

Issue 1 Page 221 of 425

Canopy System User Guide

Figure 82: IP Configuration screen, NAT without DHCP

When NAT (network address translation) is enabled, you may set the following IP

Configuration page parameters.

NAT Private Network Interface Configuration, IP Address

Assign an IP address for SM management. This address is available from only Ethernet

access to the SM. The last characters of this address must be .1. This address becomes

the base for the range of DHCP-assigned addresses.

NAT Private Network Interface Configuration, Subnet Mask

Assign a subnet mask of 255.255.255.0 or a more restrictive subnet mask.

DMZ Host Interface Configuration, IP Address

Either enable or disable DMZ for this SM. See DMZ on Page 117.

Also assign the DMZ IP address to use for this SM when DMZ is enabled. The first three

octets of this address are automatically set as identical to the first three octets of the

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 424 425

Comentarios a estos manuales

Sin comentarios

Motorola Canopy Backhaul Module Guía de usuario Pagina 221

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Motorola Canopy Backhaul Module