Motorola Canopy Backhaul Module Guía de usuario descargar pdf (Pagina 168)

100

101

March 2005 Building Your Canopy Network

Through Software Release 6.1

Page 168 of 425 Issue 1

Canopy System User Guide

Site Name

This field indicates the name of the physical module. You can assign or change this

name on the Configuration web page. This information is also set into the sysName

SNMP MIB-II object and can be polled by an SNMP management server.

Site Contact

This field indicates contact information for the physical module. You can provide or

change this information on the Configuration web page. This information is also set into

the sysName SNMP MIB-II object and can be polled by an SNMP management server.

To conclude the test, perform the following steps.

Procedure 20: Verifying and recording information from the BHM

1. Confirm that the GPS Sync Pulse Status field indicates Generating Sync.

NOTE: This indication confirms that the BHM is properly functional.

2. While your browser is set to this BHM Status page, note (or print) the values of

the following fields:

◦ Device type

◦ Software Version

◦ Software Boot Version

◦ FPGA Version

3. Systematically ensure that you can retrieve this data when you prepare to deploy

the BHM.

end of procedure

16.4.7 Configuring a CMMmicro for Test

The layout of the CMMmicro is as shown in Figure 62.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 424 425

Comentarios a estos manuales

Sin comentarios

Motorola Canopy Backhaul Module Guía de usuario Pagina 168

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Motorola Canopy Backhaul Module