Motorola SG4-DRT-2X Instrucciones de operaciones Pagina 97

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 108
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 96
Installation 5-7
SG4000 Installation and Operation Manual
Figure 5-7 illustrates the optional strand bracket installed on an SG4000.
Figure 5-7
Optional strand bracket – installed
Pedestal Mounting
To mount the SG4000 in a pedestal or surface installation:
1 Remove the two 5/16 × 18 bolts and associated strand clamps from the top of the node
housing base.
2 Install the two bolts through the mounting brackets (not supplied) and into the two
threaded holes (Figure 5-8) on the horizontal center-line on the rear of the housing base and
torque to 10–12 ft-lbs.
3 Mount the brackets to the pedestal or surface installation and secure with appropriate
hardware.
4 Re-install any modules and electronic components that were removed before the housing
was installed.
Vista de pagina 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 107 108

Comentarios a estos manuales

Sin comentarios