Motorola 7545MBWM Guía de usuario descargar pdf (Pagina 223)

Accessories 5 - 3

Pistol Grips

There are a number of pistol grips available to you depending on the type of back cover and scanner/imager

installed in your hand-held. Refer to the table following for a list of pistol grip model numbers and the types of

back covers and scanners/imagers with which they are compatible.

Removing the Trigger Cover

Before installing the pistol grip, you need to remove the trigger cover.

Using a flathead screwdriver, gently and carefully pr

y the trigger cover off the hand-held.

Figure 5-1

Removing the Trigger Cover

Attaching the Pistol Grip

The pistol grip is attached to the back of Omnii using the four threaded inserts in the upper part of the Omnii

casing (see Figure 5-2 Attaching the Pistol Grip). Four M3x6 Phillips head

screws are provided.

• Position the pistol grip so that it fits snugly over the back of the unit and the holes in the pistol grip are

alig

ned with the threaded inserts on the back of the hand-held.

• Using a Phillips screwdriver, tighten the screws to a torque

of 3 lbs-in (3kgf-cm) to secure the pistol grip

in place.

Pistol Grip Description Model Number

Pistol Grip Standard Pod Kit ST6000

Pistol Grip Standard Back A Kit ST6100

Pistol Grip Standard Back B Kit ST6400

Pistol Grip Freezer Standard

ck Kit

ST6500

NOTE Prior to installation, make sure the trigger mechanism is securely snapped into

the pistol grip body and that the trigger operates properly.

1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 349 350

Sin comentarios

Motorola 7545MBWM Guía de usuario Pagina 223