Motorola 7545MBWM Guía de usuario descargar pdf (Pagina 286)

C - 10 Omnii (Windows Embedded Hand-Held 6.5) User Guide

Short Code

When enabled, this parameter allows scanning of short I 2 of 5 barcodes (2 characters). When disabled, these

sho

rt barcodes are rejected.

Enabling “Short Code” may reduce the robustness of the

decoding since the hand-held must decode more

potential barcodes; it is therefore not recommended for general-purpose barcodes with 4 or more characters.

Verify

The value entered for this parameter determines the numbe

r of correct additional decodes required after the

initial decode, prior to a barcode being accepted. Higher values significantly increase the time it takes to

decode a barcode but also improve the reliability of the decoded barcode.

Security

This parameter controls the to

lerance for decoding edge-to-edge barcodes (Code 93, Code 128, UPC/EAN).

Lower values have a lower tolerance for misreads, but they also increase the time it takes to decode the

barcode. The default value of 30 is generally a good compromise setting.

The barcode symbologies for the scanner

are listed in table following.

Non-Decoded Barcode Symbologies

Code 39 Code 93 (disabled)

Code 128 Code 11 (disabled)

EAN 13 Interleaved 2 of 5 (disabled)

EAN 8 MSI Plessey (disabled)

UPC-A Discrete 2 of 5 (disabled)

UPC-E IATA 2 of 5 (disabled)

Codabar (disabled)

1 2 ... 281 282 283 284 285 286 287 288 289 290 291 ... 349 350

Sin comentarios

Motorola 7545MBWM Guía de usuario Pagina 286