Motorola 7545MBWM Guía de usuario descargar pdf (Pagina 34)

1 - 8 Omnii (Windows Embedded Hand-Held 6.5) User Guide

• Press and hold down the [FN] key, the [Power] button and the [SCAN] key simultaneously for a minimum

of six seconds.

The Omnii displays the Boot to BooSt menu.

• On an al

pha keyboard, type .clean.

• On a num

eric keyboard, type .25326.

Boot to BooSt

If you choose Boot to BooSt, the BooSt menu is loaded.

• Press and hold down the [F

N] key, [Power] button and [SCAN] key for a minimum of four seconds.

• Press [1

] to launch the OS.

Performing a Hard Reset

To execute a hard reset:

• Remove the battery.

• Using a coin, or other conductive item,

connect pins 5 and 6 of the Omnii battery contacts for at least six

seconds.

• Replace the battery and power the Omnii on. The computer will boot as if from a cold reset.

Attaching Carrying Accessories

Motorola recommends that a carrying accessory — a hand strap — be installed on the Omnii before use. For

detailed information, see “Carrying and Protective Accessories” on page 5-4.

Calibrating the Touchscreen

The Omnii touchscreen feature is factory-calibrated and ready-to-go; however, over time the touchscreen's

operating parameters may change, and it may need to be recalibrated for correct operation. Refer to “Cali-

brating the Touchscreen” on page 2-13 for details.

IMPORTANT This procedure is recommended as a last resort, when all other

methods fail.

Pin 6

Pin 5

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 349 350

Sin comentarios

Motorola 7545MBWM Guía de usuario Pagina 34