Motorola 7545MBWM Guía de usuario descargar pdf (Pagina 281)

Scanner Settings C - 5

Decoded (Internal) Advanced Options

Scan Mode

You can set the method of scanning by setting this parameter to Scan

beam only, Aim with Scan: 1 trigger pull,

Aim with Scan: 2 trigger pulls, Aim with Scan on trigger release, and Continuous Scan Mode. Default is Scan

beam only.

Aim Duration

This parameter determines the total time

the aiming pattern appears before the scanner laser begins

sweeping. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value

from 0 to 30 (0 to 3 sec.). A value of 0 (zero) disables the aiming-dot.

Minimum Cancel Time

The value assigned to this parameter determines the time dela

y before the scanner is turned off, once the

scanner trigger or button is released. This gives the scanner a minimum amount of time to complete its current

decode before the scan is cancelled when you quickly trigger on/off.

Power Mode

This parameter is a power-saving option. Tapping on it displays a scr

een listing two power mode options:

Continuous Power and Low Power.

In Contin

uous Power mode, the scanner is always on, waiting for a trigger pull or serial communication.

In Lo

w Power mode, the scanner is in a standby state, drawing minimal power until a trigger pull or serial

communication wakes it. Keep in mind that while this option is more suitable for battery powered applications,

there will be a slight delay while the scanner powers up to scan a barcode.

Low Power Timeout

To extend laser life, you can select the time the scanne

r remains active following a successful decode. The

scanner wakes from low power mode when a barcode is scanned — a successful decode restores normal

flashing.

This is only used if the unit’s Tr

igger Mode has been changed to Continuous On. If the unit is used in a fixed

mount this parameter might be used, but not if the unit is used as a hand-held.

When you double-tap on this parameter, a dialog box is displayed in which you can choose a value of 30 sec.,

1 min., 2 min. or 3 min.

Parameter Scanning

Setting this parameter to on ena

bles decoding of parameter barcodes.

Linear Security Level

This parameter allows you to select th

e security level appropriate for your barcode quality. There are four

levels of decode security for linear code types (e.g., Code 39, Interleaved 2 of 5). Higher security levels should

e selected for decreasing levels of barcode quality. As security levels increase, the scanner’s decode

speed decreases.

Double-tapping on this parameter displays a dialog

box in which you can enter a value from 1 to 4.

NOTE This parameter is only used if the Trigger Mode has been set to Continuous On

and Omnii is mounted in a fixed position; otherwise, ‘Low Power Timeout’ is

not used.

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 349 350

Comentarios a estos manuales

Sin comentarios

Motorola 7545MBWM Guía de usuario Pagina 281

Comentarios a estos manuales

Relacionado con productos y manuales para Computadoras móviles de mano Motorola 7545MBWM