Motorola 7545MBWM Guía de usuario Pagina 259

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 350
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 258
Imagers Applet B - 5
Low power
This preset minimizes the use of the flash so a
s to conserve the battery power on the Omnii.
Glossy surface
This preset minimizes the use of th
e flash so as to reduce reflection. This preset is used to read barcodes that
are behind glass, or inside the plastic window of an envelope.
Image Capture Predefined Presets
The following presets enable successful image capture in almost all conditions.
Default
This preset works in a wide range of conditions. It is
optimized for a normal office lighting (about 300 Lux).
Motion
This preset uses a shorter exposure t
ime so as to freeze motion.
Low light near
This preset is designed for dark conditions, it uses a lon
ger exposure time and includes the flash.
Using the Imagers Applet
Configuring the Image Capture Presets
To configure the image capture presets, open the dialog box as follows:
•Tap on S
tart>Settings>System icon.
Tap on the Imagers icon, and
if it’s not already selected, tap on the Imaging tab.
The following screen is displayed:
Figure B-1
Imaging Tab
NOTE It is recommended that the default preset be used whenever possible.
Vista de pagina 258
1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 349 350

Comentarios a estos manuales

Sin comentarios