
2 - 37 Omnii (Windows Embedded Hand-Held 6.5) User Guide
Using Windows Mobile Device Center
If you are running Windows Vista, Windows 7, or later, your data transfers do not require ActiveSync.
Instead, you will need to download W
indows Mobile Device Center. For instructions, go to the following down-
load website and type the name into the search box:
http://www.microsoft.com/dow
nloads/en/default.aspx
To transfer data between your PC and your hand-held:
•Tap on St
art>Computer to display the drives. Omnii will be visible here.
• Open drives, files and folders as you would on your PC.
General Maintenance
Caring for the Touchscreen
The touchscreen is covered with a thin, flexible polyester plastic sheet with a conductive coating on the inside.
The polyester can be permanently damaged by harsh chemicals and is susceptible to abrasions and
scratches. Using sharp objects on the touchscreen can scratch or cut the plastic, or crack the internal conduc-
tive coating. The chemicals listed below must not come into contact with the touchscreen:
• mustard, ketchup
• sodium hydroxide
• concentrated caustic solutions
• benzyl alcohol
• concentrated acids
If the touchscreen is used in harsh environments, conside
r applying a disposable screen protector (RV6105).
These covers reduce the clarity of the display slightly but will dramatically extend the useful life of the touch-
screen. When they become scratched and abrad
ed, they are easily removed and replaced.
Do not to expose the touchscreen to direct sunlight for pr
olonged periods of time. If this is unavoidable, use a
UV screen protector to extend the life of the screen.
Cleaning the Omnii
• Use only mild detergent or soapy water to clean the hand-held unit.
• Avoid abrasive cleaners, solvents o
r strong chemicals for cleaning. The Omnii has a plastic case that is
susceptible to harsh chemicals. The plastic is partially soluble in oils, mineral spirits, aircraft de-icing fluid,
and gasoline. The plastic slowly decomposes in strong alkaline solutions.
• Exposure to aircraft de-icing fluids can degrade the plastics o
n the Omnii. If the Omnii is used near aircraft
de-icing environments, regular rinsing with water is recommended.
• To clean ink marks from the keypad and touchscreen, use isopropyl alcohol.
IMPORTANT Do not immerse the unit in water. Dampen a soft cloth with mild
detergent to wipe the unit clean.
To prevent damage to the touchscreen, use only your finger or the
stylus (pen) supplied with your Omnii.
Comentarios a estos manuales