Motorola 7545MBWM Guía de usuario descargar pdf (Pagina 239)

Accessories 5 - 19

Figure 5-16

Front and back of ST1002 with Omnii

Motorola also supplies a range of standard mounts for the hand-held vehicle cradles, and the Omnii vehicle

cradles are compatible with all of them.

Vehicle Cradle Mounting Recommendations

Pedestal mounts are recommended for all fixed mount locations because they offer optimal operator access. In

addition, for safety reasons, only pedestal mounts with fully locking joints should be used in vehicles. Always

adjust the pedestal for the optimum viewing angle, and securely tighten the hex and wing screws.

The most effective way to mount the vehicle cradle is to

use brackets with the MT3324 (short arm) or MT3325

(standard arm) kit. The ST1002 requires either the MT3326 or MT3327 bracket; the ST1000 requires the

MT3328 bracket.

Release button

Mounting holes

Power/Communications port

WARNING Before mounting a vehicle cradle in a vehicle, there are a number of

operator safety issues that require careful attention. An improperly

mounted cradle may result in one or more of the following: operator

injury, operator visibility obstruction, operator distraction and/or

poor ease of egress for the operator. Motorola strongly recom-

mends that you seek professional mounting advice from the vehicle

manufacturer.

Ensure that you read the ST1002 Vehicle Cradle Installation Instruc-

tions document (PN 1020305), enclosed with the ST1002, for

important safety information on connecting fuses.

Cable routing within a vehicle cab also requires careful considera-

tion, especially for devices with loose cables. If you are unable to

obtain suitable advice, contact Motorola for assistance. Note also

that for better protection, the equipment should be mounted inside

the vehicle roll cage.

1 2 ... 234 235 236 237 238 239 240 241 242 243 244 ... 349 350

Sin comentarios

Motorola 7545MBWM Guía de usuario Pagina 239