Motorola 7545MBWM Guía de usuario descargar pdf (Pagina 248)

5 - 28 Omnii (Windows Embedded Hand-Held 6.5) User Guide

Troubleshooting

Improper Battery Storage

Storing batteries in the gang charger for extended periods (more than a week or two) is not recommended.

Lithium-ion batteries lose capacity if they are maintained at full charge for long periods of time. See the battery

handling recommendations in “The Battery” on page 1-5.

Power Self-test LEDs Don’t Light Up

The charge slot LEDs will light up briefly when first applying power indicating the self-test mode. When

applying power to the unit, all the LEDs will light up. Yellow will show up in the 25% LED for each bay; green for

other LEDs. Then bay #1 will blink a binary representation of the firmware version (V09 = 1001). If the self-test

is not evident:

• Remove all batteries, and unplug the charger.

• Connect another device to the mains outlet to ensure there is power.

• Remove the IEC mains power cable from the charger, and check it for damage.

• Reconnect the mains cable in the charger and mains outlet.

Indicator Does Not Light When Battery Installed

• Remove the battery, and clean the contacts on the battery and the charge slot.

• Reinstall the battery, and check that it

is fully seated in the slot.

• Inspect the charge slot contacts for damage (ar

e they bent, flattened, twisted or broken).

• Try inserting a battery that you know to be working in the charger slot.

• Reconnect the mains power cable, and check that th

e slot indicator flashes at power up.

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 349 350

Sin comentarios

Motorola 7545MBWM Guía de usuario Pagina 248