
3 - 14 WiNG CLI Reference Guide
Example
rfs7000-37FABE#clear crypto isakmp sa 111.222.333.01 on rfs7000-37FABE
rfs7000-37FABE#
rfs7000-37FABE#clear event-history
rfs7000-37FABE#
rfs7000-37FABE#clear firewall dos stats on rfs7000-37FABE
rfs7000-37FABE#
rfs7000-37FABE#clear spanning-tree detected-protocols interface port-channel 1 on
rfs7000-37FABE
rfs7000-37FABE#
rfs7000-37FABE#clear ip dhcp bindings 172.16.10.9 on rfs7000-37FABE
rfs7000-37FABE#
rfs7000-37FABE#clear cdp neighbors on rfs7000-37FABE
rfs7000-37FABE#
rfs4000-880DA7#clear spanning-tree detected-protocols interface ge 1
rfs4000-880DA7#
rfs4000-880DA7#clear lldp neighbors
rfs4000-880DA7#
ip dhcp bindings [<IP>|all]
{on <DEVICE-NAME>}
Clears the DHCP address bindings.
• on <DEVICE-NAME> – Optional. Clears the CDP/LLDP neighbor
table entries on a selected AP or Controller
• <DEVICE-NAME> – An AP or a Controller name
spanning-tree detected-
protocols {interface
{<INTERFACE>|ge <1-
8>|me1|port-channel <1-
4>|vlan <1-4094>} {on
<DEVICE-NAME>}
Clears the spanning-tree protocols configured for the interface
• detected-protocols {interface [<INTERFACE>|ge <1-8>|me1|port-
channel <1-4>|vlan <1-4094>]} {on} – Enter the interface name to clear
the detected spanning tree protocols for that specific interface
• <INTERFACE> – Clears the selected interface name
• ge < 1-8> – Clears the configured GigabitEthernet interface status
• me1– Clears the FastEthernet interface status
• port-channel <1-4> – Clears the port-channel information on a
AP/Controller
• vlan <1-4094> – Clears the configured vlan information
• wwan1– Clears the Wireless WAN interface information
The following are common for the above
• on <DEVICE-NAME> – Optional. Clears the CDP/LLDP neighbor
table entries on a selected AP or Controller
• <DEVICE-NAME> – An AP or a Controller name
Comentarios a estos manuales