
6 - 44 WiNG CLI Reference Guide
igmp snooping
[mrouter|vlan]
Displays Internet Group Management Protocol (IGMP) information
• snooping – IGMP snooping
• mrouter vlan <1-4095> {on <DEVICE-NAME>} – Multicast router
• vlan <1-4095> – Specifies a VLAN index value from 1 and 4095
• {on <DEVICE-NAME>} – Displays information on the AP/
Controller
• <DEVICE-NAME>} – Displays information on the AP/
Controller name
• vlan <1-4095> {on <DEVICE-NAME>|<A.B.C.D> {on <DEVICE-
NAME>} – Specifies a VLAN index value from 1 and 4095
• {on <DEVICE-NAME>} – Displays information on the AP/
Controller
• <DEVICE-NAME>} – Displays information on the AP/Controller
name
interface
{<WORD>|brief|on}
Use the show ip interface command to display the administrative and
operational status of all Layer-3 interfaces or a specified Layer-3 interface.
• <WORD> – Interface name
• brief – Brief summary of the IP status and its configuration
The following parameters are common for the above.
• {on <DEVICE-NAME>} – Displays information on the AP/Controller
• <DEVICE-NAME> – Displays information on the
AP/Controller name
• on – Displays information on AP/controller
• <DEVICE-NAME>} – Displays information on the
AP/Controller name
Comentarios a estos manuales