
4 - 116 WiNG CLI Reference Guide
4.1.46.2.3802.11w
wlan-mode commands
Enables support for Protected Management Frames (IEEE 802.11w) settings
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
802.11w [mandatory|optional|sa-query]
802.11w sa-query [attempts <1-15>|timeout <100-6000>]
Parameters
Example
rfs7000-37FABE(config-wlan-wlan1)#802.11w sa-query timeout 110
rfs7000-37FABE(config-wlan-wlan1)#802.11w sa-query attempts 1
rfs7000-37FABE(config-wlan-1)#show context
wlan 1
ssid WLAN_USECASE_01
vlan 2
bridging-mode tunnel
encryption-type none
authentication-type none
802.11r mobility-domain-id 9f21
802.11w sa-query timeout 110
802.11w sa-query attempts 1
[mandatory|optional|
sa-query]
• mandatory – Enforces protected management frame settings on the
WLAN
• optional – Advertises support for PMF but it is enforced only for clients
that indicate their support
• sa-query – Enables security association query settings
• attempts <1-15> – Sets the number of times an sa-query message is
attempted
• timeout <100-6000> – Sets the timeout when waiting for a response
to a security-association-query, before resending
Comentarios a estos manuales