
GLOBAL CONFIGURATION COMMANDS 4 - 127
4.1.46.2.14client-load-balancing
wlan-mode commands
Configures load balancing of wireless clients on the specified WLAN
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
client-load-balancing {allow-single-band-clients [2.4ghz|5ghz]|
band-discovery-intvl <0-10000> |capability-ageout-time <0-10000>|
max-probe-req|probe-req-intvl}
client-load-balancing {max-probe-req|probe-req-intvl} [2.4ghz|5ghz]
<0-10000>
Parameters
Example
rfs7000-37FABE(config-wlan-wlan1)#client-load-balancing allow-single-band-clients
2.4ghz
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#client-load-balancing band-discovery-intvl 2
rfs7000-37FABE(config-wlan-wlan1)#
rfs7000-37FABE(config-wlan-wlan1)#client-load-balancing probe-req-intvl 5ghz 5
rfs7000-37FABE(config-wlan-wlan1)#
{allow-single-band-clients
[2.4ghz|5ghz]|
band-discovery-intvl
<0-10000> |capability-
ageout-time <0-10000>|
max-probe-req|
probe-req-intvl}
• allow-single-band-clients [2.4ghz|5ghz] – Allows single band wireless
clients to associate even during load balancing
• 2.4ghz – Enables balancing of loads across 2.4ghz channels
• 5ghz – Enables balancing of loads across 5ghz channels
• band-discovery-intvl <0-10000> – Configures time interval to discover
client's band capability before associating it
• capability-ageout-time <0-10000> – Configures time before it ages out
client's capability information
• max-probe-req [2.4ghz|5ghz] <0-10000> – Configures client probe
requests beyond which, it is allowed to associate
• probe-req-intvl [2.4ghz|5ghz] <0-10000> – Configures interval for client
probe requests beyond which, it is allowed to associate
• <0-1000> – Sets band discovery interval between 0 and 10000
seconds
Comentarios a estos manuales