Motorola 2.1 Guía de instalación Pagina 200

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 952
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 199
4 - 38 WiNG CLI Reference Guide
Example
rfs7000-37FABE(config)#customize show-wireless-client ap-name auth
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#customize show-wireless-client-stats mac
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#customize show-wireless-client-stats-rf average-retry-number
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#customize show-wireless-radio adopt-to
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#customize show-wireless-radio-stats radio-mac
rfs7000-37FABE(config)#
show-wireless-radio-stats
[radio-alias|radio-id|
radio-mac|rx-bytes|rx-errors|
rx-packets|rx-throughput|
tx-bytes|tx-dropped|
tx-packets|tx-throughput
Customizes the output of (show wireless radio stats) commands
radio-alias – Radio alias with AP's hostname and the radio interface
number in the form of hostname:RX
radio-id – Consists of the AP MAC address and the radio interface
number in the form of AA-BB-CC-DD-EE-FF:RX
radio-mac – The base MAC address of the radio
rx-bytes – Displays the number of bytes received
rx-errors – Displays the number of errors receive
rx-packets – Displays the number of packets received
rx-throughput – Displays the number of packets received per port and
the percentage of port utilization
tx-bytes – Displays the number of bytes transmitted
tx-dropped – Displays the number of packets dropped during
transmission
tx-packets –Displays the total number of packets transmitted
tx-throughput – Displays the number of packets transmitted per port
and the percentage of port utilization
show-wireless-radio-stats-rf
[average-retry-number|error-
rate|noise|q-index|radio-
alias|radio-id|radio-mac|rx-
rate|signal|snr|t-index|tx-
rate]
Customizes the output of (show wireless radio stats rf) commands
average-retry-number – Displays the average retry number per packet
error-rate – Displays the error rate
noise – Displays the noise level in dBm
q-index – Q-Index
radio-alias –Consists of the AP's hostname and the radio interface
number in the form of hostname:RX
radio-id – Radio ID with the AP MAC address and the radio interface
number in the form of AA-BB-CC-DD-EE-FF:RX
radio-mac – The base MAC address of the radio
rx-rate – Displays the rate of radio packets received
signal – Displays the signal strength in dBm
snr – Displays the Signal to Noise Ratio in db
t-index – T-index
tx-rate – Displays the rate at which radio packets are transmitted
Vista de pagina 199
1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 951 952

Comentarios a estos manuales

Sin comentarios