
4 - 120 WiNG CLI Reference Guide
4.1.46.2.7authentication-type
wlan-mode commands
Sets the authentication type for the WLAN
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
authentication-type [eap|eap-mac|eap-psk|kerberos|mac|none]
Parameters
Example
authentication-type none
rfs7000-37FABE(config-wlan-1)#authentication-type eap
rfs7000-37FABE(config-wlan-1)#show context
wlan 1
ssid WLAN_USECASE_01
vlan 2
bridging-mode tunnel
encryption-type eap
authentication-type none
[eap|eap-mac|eap-psk|
kerberos|mac|none]
Sets the authentication type for this WLAN
• eap – EAP authentication (802.1X)
• eap-mac – EAP or MAC authentication depending on client (valid only
with no encryption or WEP)
• eap-psk – EAP authentication or pre-shared-keys depending on client
(valid only with TKIP/CCMP)
• kerberos – Kerberos authentication (encryption will change to WEP128
if its not already WEP128/Keyguard)
• mac – MAC authentication (RADIUS lookup of MAC address)
• none – No authentication is used
Comentarios a estos manuales