
14 - 8 WiNG CLI Reference Guide
14.1.6 flow
firewall-policy
Defines the session flow timeout for different packet types
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
flow [dhcp|timeout]
flow dhcp stateful
flow timeout [icmp|other|tcp|udp]
flow timeout [icmp|other|udp] <1-32400>
flow timeout tcp [close-wait|reset|setup|stateless-fin-or-reset|
stateless-general] <1-32400>
flow timeout tcp established <15-32400>
Parameters
[dhcp|timeout] Defines session flow timeout
• dhcp stateful – Sets the DHCP flow between 1 and 32400 seconds
• timeout [icmp|other|udp] <1-32400> – Sets the flow timeout based on
the packet type
• icmp – Sets the timeout for ICMP packets between 1 and 32400
• other – Sets the timeout for any packet type between 1 and 32400
seconds
• udp <1-32400 – Sets the timeout for UDP packets between 1 and
32400 seconds
• <1-32400> – Based on the packet type, the timeout is set
between 1 and 32400 seconds
• tcp[close-wait|established|reset|setup|stateless-fin-or-reset
|stateless-general] – Based on the TCP state, the timeout is set
between 1 and 32400 seconds
• close-wait <1-32400> – Closed TCP flow
• established <15-32400> – Established TCP flow. Set the
timeout between 15 and 32400 seconds
• reset <1-32400> – Reset TCP flow
• setup <1-32400> – Opening TCP flow
• stateless-fin-or-reset <1-32400> – Stateless TCP flow created
with FIN or RESET packet
• stateless-general <1-32400> – Stateless TCP Flow
• <1-32400> – Based on the packet type, the timeout is set
between 1 and 32400 seconds
Comentarios a estos manuales