
7 - 104 WiNG CLI Reference Guide
7.1.40 power-config
Creating Profiles
Configures the power mode feature
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
power-config [af-option|at-option||mode]
power-config af-option[range|throughput]
power-config at-option [range|throughput]
power-config mode [auto|3af]
Parameters
Example
rfs7000-37FABE(config-profile-defalut-rfs7000)#power-config af-option range
% Warning: AP must be restarted for power-management change to take effect.
rfs7000-37FABE(config-profile-defalut-rfs7000)#
rfs7000-37FABE(config-profile-defalut-rfs7000)#power-config at-option throughput
% Warning: AP must be restarted for power-management change to take effect.
rfs7000-37FABE(config-profile-defalut-rfs7000)#
af-option [range|throughput] Configures the af power option mode
• range – Configures the af power range mode
• throughput – Configures the power throughput mode
at-option [range|throughput] Configures the af power option mode
• range – Configures the af power range mode
• throughput – Configures the power throughput mode
mode [auto|3af] Configures the power mode of this AP
• 3af – Forces an AP bring up at the 3af power mode
• auto – Power the detection auto mode
Comentarios a estos manuales