
9 - 8 WiNG CLI Reference Guide
Parameters
Example
rfs7000-37FABE(config-auto-provisioning-policy-test)#deny ap7131 600 vlan 1
rfs7000-37FABE(config-auto-provisioning-policy-test)#deny ap7131 600 ip 172.16.10.1/
24
rfs7000-37FABE(config-auto-provisioning-policy-test)#show context
auto-provisioning-policy test
default-adoption
deny ap71xx 100 vlan 20
deny ap71xx 101 ip 172.16.11.0/24
[ap7131|ap650|ap6511|
ap6532] <1-1000>
[any|cdp-match
<WORD>|dhcp-option
<WORD>|fqdn|ip|lldp-match
<WORD>|mac|model-number
<WORD>|serial-number
<WORD>|vlan <VLAN-ID>]
Use the ‘deny’ command to add a rule to deny a device adoption
• ap7131 – Configures an AP7131
• ap650 – Configures an AP650
• ap6511 – Configures an AP6511
• ap6532 – Configures an AP6532
The following parameters are common for both AP7131 and AP650:
• <1-1000> – Configure a rule precedence value between 1 and 1000
• any – Matches any device
• cdp-match <WORD> – Matches device location based on CDP
snoop
• <WORD> – Specify the location substring to match
• dhcp option <WORD> – Matches the value of DHCP option
• <WORD> – Enter the DHCP option name
• fqdn <WORD> – Matches the value of FQDN
• <WORD> – Specify the value to match
• ip [<Starting IP> <Ending IP>|<A.B.C.D/M>] – Matches device IP
address
• <Starting IP> <Ending IP> – Enter a beginning and an ending
IP address range to configure
• <A.B.C.D/M> – Enter the IP address to configure
• lldp-match <WORD> – Matches device location based on LLDP
snoop
• <WORD> – Specify the location substring to match
• mac <Starting MAC > {<Ending MAC>} – Matches device MAC
address
• <Starting MAC> <Ending MAC> – Enter a starting and ending
MAC address of a range on MAC addresses. Ending MAC
address is optional.
• model number <WORD> – Matches device model number
• <WORD> – Enter the matching device model number
• serial number <WORD> – Matches device serial number
• <WORD> – Enter the matching device serial number
• vlan <VLAN-ID> – Matches device VLAN
• <VLAN-ID> – Enter a target VLAN ID
Comentarios a estos manuales