
USER EXEC MODE COMMANDS 2 - 37
2.1.18 ping
User Exec Commands
Sends ICMP echo messages to a user-specified location
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
ping {[<IP>|<hostname>]}
Parameters
Example
rfs7000-37FABE>ping 172.16.10.3
PING 172.16.10.3 (172.16.10.3): 100 data bytes
108 bytes from 172.16.10.3: seq=0 ttl=64 time=7.100 ms
108 bytes from 172.16.10.3: seq=1 ttl=64 time=0.390 ms
108 bytes from 172.16.10.3: seq=2 ttl=64 time=0.422 ms
108 bytes from 172.16.10.3: seq=3 ttl=64 time=0.400 ms
--- 172.16.10.3 ping statistics ---
4 packets transmitted, 4 packets received, 0% packet loss
round-trip min/avg/max = 0.390/2.078/7.100 ms
rfs7000-37FABE>
ping {[<IP>|<hostname>]} Pings the specified destination IP address or hostname. When entered
without any parameters, this command prompts for an IP/Host-name to
ping.
Comentarios a estos manuales