
13 - 18 WiNG CLI Reference Guide
13.1.3.12 no
dhcp-pool-mode
Negates a command or sets its default value
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
no [address|bootfile|ddns|default-router|dns-server|domain-name|
excluded-address|lease|netbios-name-server|netbios-node-type|network|
next-server|option|respond-via-unicast|static-binding|static-route|update]
Parameters
Example
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#no bootfile
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#no network
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#no lease
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#no default-router
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
[address|bootfile|ddns|
default-router|dns-
server|domain-name|excluded-
address|
lease|netbios-name-
server|netbios-node-
type|network|
next-server|option|respond-
via-unicast|
static-binding|
static-route|update]
• address – Unconfigures network pool's include addresses
• bootfile – Specifies a boot file name
• default-router – Unconfigures the default router
• dns-server – Unconfigures the DNS server
• domain-name – Unconfigures the domain name
• excluded-address – Prevents a DHCP server from assigning certain
addresses
• lease – Disables an address lease time
• netbios-name-server – Unconfigures NetBIOS (WINS) name server
• netbios-node-type – Unconfigures NetBIOS node type
• next-server – Unconfigures the next server in the boot process
• option – Raw DHCP options
• respond-via-unicast – Sends a DHCP offer and DHCP Ack as broadcast
messages
• static-binding – Removes static address bindings
• static-route – Adds static routes installed on DHCP clients
• update – Controls the usage of DDNS service
Comentarios a estos manuales