
7 - 74 WiNG CLI Reference Guide
7.1.21.15 use
Interface Config Instance
Defines the settings used with this command
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
use [ip-access-list in <IP-ACCESS-LIST>|mac-access-list in
<MAC-ACCESS-LIST>]
Parameters
Example
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#use mac-access-list in test
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#
ip-access-list in
<IP-ACCESS-LIST>|
mac-access-list in
<MAC-ACCESS-LIST>]
• ip-access-list – Uses an IP access list
• in – Applies ACL on incoming packets
• <IP-ACCESS-LIST> – Specifies the IP access name to use with the
list
• mac-access-list – Uses a MAC access list
• in – Applies ACL on incoming packets
• <MAC-ACCESS-LIST> – Specifies the MAC access list name
Comentarios a estos manuales