
7 - 82 WiNG CLI Reference Guide
7.1.22.7 use
Interface vlan Instance
Defines the settings used with this command
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
use ip-access-list in <IP-ACCESS-LIST>
Parameters
Example
rfs7000-37FABE(config-profile-default-rfs7000-if-vlan44)#use ip-access-list in test
% Error: ip_acl[test] does not exist
rfs7000-37FABE(config-profile-default-rfs7000-if-vlan44)#
ip-access-list in
<IP-ACCESS-LIST
>
Specifies the IP access list value
• in – Sets incoming packets
• IP-ACCESS-LIST – Specifies the IP access list name
NOTE: The commands clrscr, commit, end, exit, help, revert, show, service are common
across all chapters. For more information, see Chapter 5, COMMON COMMANDS.
Comentarios a estos manuales