
SMART-RF-POLICY 21 - 11
21.1.9 neighbor-recovery
smart-rf-policy
Enables a recovery from errors due to faulty neighbor radios
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
neighbor-recovery {power-hold-time <0-3600>|power-threshold} [2.4Ghz|5Ghz]
<-85--55>
Parameters
Example
rfs7000-37FABE(config-smart-rf-policy-test)#neighbor-recovery power-threshold 2.4 -
82
rfs7000-37FABE(config-smart-rf-policy-test)#
rfs7000-37FABE(config-smart-rf-policy-test)#neighbor-recovery power-threshold 5 -65
rfs7000-37FABE(config-smart-rf-policy-test)#
power-hold-time <0-3600> Specifies the minimum time between two power change recoveries
• <0-3600> – Sets the time between 0 and 3600 seconds
{power-threshold}
[2.4Ghz|5Ghz] <-85--55>
Specifies the power threshold based on the recovery performed
• [2.4Ghz|5Ghz] <-85--55> – Select the band width as 2.4 Dez or 5Ghz
• <-85--55> – Select a threshold value between -85 and -55 dbm
Comentarios a estos manuales