
ACCESS-LIST 12 - 11
• [<dest-IP>|any|host <IP>] – Defines the destination host IP address or
destination network address
• <ICMP-type> {<ICMP-code>} – Sets the ICMP type value
<ICMP-type> from 0 to 255, and is valid only for ICMP. The ICMP code
value <ICMP-code> is from 0 to 255, and is valid only for protocol type
icmp
• log – Generates log messages when the packet coming from the
interface matches the ACL entry. Log messages are generated only for
router ACLs
• rule-precedence <1-5000> – Defines an integer value between
1-5000. This value sets the rule precedence in the ACL
• mark – Use with mark command to mark a packet
• 8012p <0-7> – Sets the 802.1p VLAN user priority value to
<vlan-priority-value> (0-7)
• dscp <0-63> – Sets the Differentiated Services Code Point (DSCP)
code-point value to <dscp-codepoint-value> (0-63)
Comentarios a estos manuales