
17 - 14 WiNG CLI Reference Guide
Parameters
Example
rfs7000-37FABE(config-management-policy-test)#snmp-server community snmp1 ro
rfs7000-37FABE(config-management-policy-test)#
rfs7000-37FABE(config-management-policy-test)#snmp-server host 172.16.10.23 v3 162
rfs7000-37FABE(config-management-policy-test)#commit
rfs7000-37FABE(config-management-policy-test)#
rfs7000-37FABE(config-management-policy-test)#snmp-server user snmpmanager v3 auth
md5 symbol123
rfs7000-37FABE(config-management-policy-test)#
rfs7000-37FABE(config-management-policy-test)#show context
management-policy test
http server
https server trustpoint testtrust
community <WORD> [ro|tw] Sets the community string and access privileges.
• <WORD> – Sets the community string
• ro – Assigns read-only access to this community string
• rw – Assigns read-write access to this community string
enable traps Enables SNMP traps
host <A.B.C.D> [v2c|v3]
{<1-65535>}
SNMP server host
• <A.B.C.D> – Sets the SNMP server host IP address
• v2c – Use SNMP version 2c
• v3 – Use SNMP version 3
• <1-65535> – Select a value between 1 and 65535 to configure
the port. The default port is 162
manager [all|v2|v3] Enables SNMP manager
• all – Enables SNMP version v2 and v3
• v2 – Enables SNMP version v2
• v3 – Enable SNMP version v3
snmp-server user
[snmpmanager|snmpoperator|
snmptrap] v3 [auth
md5|encrypted [auth md5|des
auth md5][0|2|<WORD>]]
Defines a user who can access the SNMP engine
• snmpmanager – Sets the user as a manager
• snmpoperator – Sets the user as a operator
• snmptrap – Sets the user as a SNMP trap user
The following parameters are common for all the above types of users:
• v3 [auth md5|encrypted] – Use the SNMPv3 as the security model
• auth md5 – Authentication protocol
• md5 – Uses the HMAC-MD5 algorithm for authentication
• encrypted [auth|des] – Encrypted protocol
• auth md5 – Sets authentication parameters for the user
• md5 [0|2|<WORD>] – Uses the HMAC-MD5 algorithm for
authentication
• 0 – Enter a clear text password
• 2 – Enter an encrypted password
• <WORD> – Specify a password for authentication and
privacy protocols
• des – Uses CBC-DES for privacy
Comentarios a estos manuales