
PROFILES 7 - 65
7.1.21.8 no
Interface Config Instance
Negates a command or sets its defaults
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
no [arp|cdp|channel-group|description|dot1k|duplex|ip|lldp|power|qos|
shutdown|spanning-tree|speed|switchport|use]
Parameters
None
Usage Guidelines
The no command negates any command associated with it. Wherever required, use the same parameters associated with
the command getting negated.
Example
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#no cdp
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#no duplex
rfs7000-37FABE(config-profile-default-rfs7000-if-ge1)#
Comentarios a estos manuales