
PROFILES 7 - 21
7.1.7 cdp
Creating Profiles
Operates the Cisco Discovery Protocol (CDP) on the device
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
cdp [holdtime <10-1800>|run|timer <5-900>]
Parameters
Example
rfs7000-37FABE(config-profile-default-rfs7000)#cdp run
rfs7000-37FABE(config-profile-default-rfs7000)#
rfs7000-37FABE(config-profile-default)#cdp holdtime 11
rfs7000-37FABE(config-profile-default)#
rfs7000-37FABE(config-profile-default)#cdp timer 15
rfs7000-37FABE(config-profile-default)#
holdtime <10-1800> Specifies the holdtime value transmitted in CDP
packets between 10 and 1800 seconds
run Enables CDP sniffing and transmit globally
timer <5-900> Specifies the timer value between 5 and 900
seconds
Comentarios a estos manuales