
4 - 146 WiNG CLI Reference Guide
4.1.46.2.30wep128
wlan-mode commands
Configures WEP128 parameters
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
wep128 [key|keys-from-passkey|transmit-key]
wep128 key <1-4> [ascii|hex] [0|2|<WORD>]
wep128 keys-from-passkey <WORD>
wep128 transmit-key <1-4>
Parameters
Example
rfs7000-37FABE(config-wlan-1)#wep128 transmit-key 1
rfs7000-37FABE(config-wlan-1)#
key <1-4> [ascii|hex]
[0|2|<WORD>]
key <1-4> [ascii|hex] – Configures pre-shared hex keys
• ascii [0|2|<WORD>] – Sets keys as ASCII characters (5 characters for
WEP64, 13 for WEP128)
• <WORD> – Keys as 13 ascii characters that are converted to hex, or
26 hexadecimal characters or as a 64 characters hexadecimal value if
encrypted
• hex [0|2|<WORD>] – Sets keys as hexadecimal characters (10
characters for WEP64, 26 for WEP128)
• 0 – Enter a clear text key
• 2 – Enter an encrypted key
• <WORD> – Keys as 13 ascii characters that are converted to hex, or
26 hexadecimal characters
keys-from-passkey <WORD> Specifies a passphrase from which keys are derived
• <WORD> – Sets the passphrase (between 4 and 32 characters)
transmit-key <1-4> Defines the key index used for transmission from an AP to a client
Comentarios a estos manuales