
25 - 16 WiNG CLI Reference Guide
25.1.12 ICMP Destination log
The following example displays an ICMP destination is unreachable when no matching payload is found.
May 19 19:57:09 2010: %DATAPLANE-5-ICMPPKTDROP: Dropping ICMP Packet from 192.168.1.104 to 192.168.2.102, with
ProtocolNumber:1 ICMP code 3 and ICMP type 3. Reason: no flow matching payload of ICMP Error.
May 19 19:57:09 2010: %DATAPLANE-5-ICMPPKTDROP: Dropping ICMP Packet from 192.168.1.104 to 192.168.2.102, with
ProtocolNumber:1 ICMP code 3 and ICMP type 3. Reason: no flow matching payload of ICMP Error.
To generate an ICMP protocol log, an ACL rule has to be applied and logging has to be enabled.
For example, the following commands has to be executed.
rfs7000-37FABE(config-ip-acl-test)#permit icmp any any log rule-precedence 20
rfs7000-37FABE(config-ip-acl-test)#
Comentarios a estos manuales