
13 - 34 WiNG CLI Reference Guide
13.1.5.10 no
static-binding-mode
Negates a command or sets its default value
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
no [bootfile|client-name||default-router|dns-server|
domain-name|ip-address||netbios-name-server|netbios-node-type|
next-server|option|respond-via-unicast|static-route]
Parameters
Example
rfs7000-37FABE(config-dhcp-net-pool-test)#no bootfile
rfs7000-37FABE(config-dhcp-net-pool-test)#
[bootfile|client-name||default-
router|dns-server|
domain-name|ip-
address||netbios-name-
server|netbios-node-type|
next-server|option|respond-
via-unicast|static-route]
• bootfile – Specifies a boot file name
• client-name – Removes a client-name
• default-router – Configures a default router
• dns-server – Configures a DNS server
• domain-name – Configures a domain name
• ip-address – Disables a fixed IP address for the host
• netbios-name-server – Configures a NetBIOS (WINS) name server
• netbios-node-type – Configures a NetBIOS node type
• next-server – Configures a next server in boot process
• option – Raw DHCP options
• respond-via-unicast – Sends a DHCP offer and DHCP Ack as broadcast
messages
• static-route – Removes static routes installed on DHCP clients
Comentarios a estos manuales