Motorola 2.1 Guía de instalación Pagina 584

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 952
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 583
8 - 10 WiNG CLI Reference Guide
Example
rfs7000-37FABE(config-aaa-policy-test)#authentication server 5 host 172.16.10.10
secret motorola port 1009
rfs7000-37FABE(config-aaa-policy-test)#authentication server 5 timeout 10 attempts 3
rfs7000-37FABE(config-aaa-policy-test)#authentication server 5 nai-routing realm
-type suffix realm @motorola.com strip
rfs7000-37FABE(config-aaa-policy-test)#authentication protocol chap
rfs7000-37FABE(config-aaa-policy-test)#authentication eap wireless-client attempts 3
rfs7000-37FABE(config-aaa-policy-test)#authentication eap wireless-client identity-
request-timeout 20
rfs7000-37FABE(config-aaa-policy-test)#authentication server 2 onboard controller
rfs7000-37FABE(config-aaa-policy-test)#show context
aaa-policy test
authentication server 5 onboard controller
authentication server 5 timeout 20
authentication server 5 nai-routing realm-type suffix realm @motorola.com strip
accounting server 1 host 172.16.10.100 secret 0 testing
accounting server 2 host 172.16.10.10 secret 0 motorola port 1008
accounting server 2 nai-routing realm-type prefix realm DSOS strip
authentication eap wireless-client identity-request-timeout 20
authentication protocol chap
accounting type start-interim-stop
accounting interim interval 65
accounting server preference auth-server-number
authentication server 5 host 172.16.10.10 secret 0 motorola port 1009
authentication server 5 timeout 20
authentication server 5 host 172
onboard [controller|self] – Selects an onboard server instead of an
external host
• controller – Specifies the onboard server on the controller to
which the AP is adopted
self – Specifies the onboard server on the device (AP or control-
ler) where the client is associated
proxy-mode [none|through-controller|through-rf-domain-manager]
– Selects the mode of proxying requests
none – Sends the requests directly using the IP address of the de-
vice without proxy
through-controller – Proxies the requests through the controller
that is configuring the device
through-rf-domain-manager – Proxies the requests through the
local rf-domain-manager
retry-timeout-factor <50-200> – Configures the scaling of the retry
timeout for the server. Enter a timeout value between 50 and 200
seconds
timeout <1-60> – Enter the timeout for each request sent to the
RADIUS server
<1-60> {attempts} – Enter the timeout in seconds
attempts <1-10> – Enter the number of times a request is sent
to the RADIUS server
<1-10> – Enter the number of attempts required before a time-
out
Vista de pagina 583
1 2 ... 579 580 581 582 583 584 585 586 587 588 589 ... 951 952

Comentarios a estos manuales

Sin comentarios