
4 - 140 WiNG CLI Reference Guide
4.1.46.2.24radius
wlan-mode commands
Configures RADIUS related parameters
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
• AP71xx
• AP650
• AP6511
• AP6532
Syntax
radius [dynamic-authorization|nas-identifier <WORD>|nas-port-id <WORD>|vlan-
assignment]
Parameters
Example
rfs7000-37FABE(config-wlan-1)#radius vlan-assignment
rfs7000-37FABE(config-wlan-1)#show context
wlan 1
ssid WLAN_USECASE_01
vlan 2
bridging-mode tunnel
encryption-type none
authentication-type none
radius vlan-assignment
dynamic-authorization Enables support for disconnect and change-of-authorization messages
(RFC5176)
nas-identifier <WORD> The WLAN NAS identifier sent to the RADIUS server. Maximum length is
256 characters
nas-port-id <port> The WLAN NAS-port-id sent to the RADIUS server. Maximum length is 256
characters
vlan-assignment Sets the VLAN assignment of this WLAN
Comentarios a estos manuales